• Out-of-Stock

Dragino TrackerD-LS -- LoRaWAN Asset Tracker

Tax excluded

TrackerD-LS is an Open Source LoRaWAN Asset Tracker based on ESP32 MCU and Semtech LoRa Wireless Chip.


  Security policy:

All our pages are protected with HTTPS / TLS 1.3 connection

  Fast Shipping:

Orders are shipped the same day from Monday to Friday for any order placed before 10:00 am

TrackerD-LS is an Open Source LoRaWAN Asset Tracker based on ESP32 MCU and Semtech LoRa Wireless Chip. It can get the location data via GPS and set it to IoT server via LoRaWAN network.

TrackerD-LS supports Motion Detection, when there is motion, TrackerD-LS can send data more frequently and it will save power when no motion is detected.

The LoRa wireless technology used in TrackerD-LS allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional tracking services.

When there is no LoRaWAN network, TrackerD-LS can save the location data. It will send these data to IoT server when there is LoRaWAN network coverage.

TrackerD-LS is equipped with a 3000mAh Li-on rechargeable battery + Solar Panel which let the device can be used for many years. Each TrackerD-LS has a worldwide unique OTAA keys to join the LoRaWAN network.

TrackerD-LS is program friendly. Developers can use Arduino IDE to customize the software of TrackerD-LS to fit their IoT solution.

Micro Controller:

        Espressif ESP32 PICO D4
        MCU: ESP32 PICO D4
        Integrated SPI flash : 4 MB
        RAM: 448 KB
        EEPROM: 520 KB
        Clock Speed: 32Mhz

Common DC Characteristics:

        Supply Voltage: 2.5v ~ 3.6v
        Operating Temperature: -40 ~ 60°C

LoRa Spec:

        Frequency Range,  168 dB maximum link budget.+20 dBm - 100 mW constant RF output vs.
            Band 1 (HF): 862 ~ 1020 Mhz
        +14 dBm high efficiency PA.
        Programmable bit rate up to 300 kbps.
        High sensitivity: down to -148 dBm.
        Bullet-proof front end: IIP3 = -12.5 dBm.
        Excellent blocking immunity.
        Low RX current of 10.3 mA, 200 nA register retention.
        Fully integrated synthesizer with a resolution of 61 Hz.
        FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
        Built-in bit synchronizer for clock recovery.
        Preamble detection.
        127 dB Dynamic Range RSSI.
        Automatic RF Sense and CAD with ultra-fast AFC.
        Packet engine up to 256 bytes with CRC.
        LoRaWAN 1.0.3 Specification


        3000mA Li-on Battery power
        Built-in Solar Panel

Power Consumption:

        Sleeping Mode: 60uA
        LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
        Tracking: max: 38mA