Dragino RS485-LB -- WaterProof RS485/UART to LoRaWAN Converter EU868
The Dragino RS485-LB is a RS485 / UART to LoRaWAN Converter for Internet of Things solutions. User can connect RS485 or UART sensor to RS485-LB converter, and configure RS485-LB to periodically read sensor data and upload via LoRaWAN network to IoT server.
Nossas páginas são protegidas com conexão HTTPS/TLS 1.3
Envio no mesmo dia de segunda a sexta para qualquer pedido feito antes das 10:00 am
The Dragino RS485-LB is a RS485 / UART to LoRaWAN Converter for Internet of Things solutions. User can connect RS485 or UART sensor to RS485-LB converter, and configure RS485-LB to periodically read sensor data and upload via LoRaWAN network to IoT server.
RS485-LB can interface to RS485 sensor, 3.3v/5v UART sensor or interrupt sensor. RS485-LB provides a 3.3v output and a 5v output to power external sensors. Both output voltages are controllable to minimize the total system power consumption.
RS485-LB is IP67 waterproof and powered by 8500mAh Li-SOCI2 battery it is designed for long term use for several years.
SRS485-LB runs standard LoRaWAN 1.0.3 in Class A. It can reach long transfer range and easy to integrate with LoRaWAN compatible gateway and IoT server.
For data uplink, RS485-LB sends user-defined commands to RS485 devices and gets the return from the RS485 devices. RS485-LB will process these returns data according to user-define rules to get the final payload and upload to LoRaWAN server.
For data downlink, RS485-LB runs in LoRaWAN Class A. When there is downlink commands from LoRaWAN server, RS485-LB will forward the commands from LoRaWAN server to RS485 devices.
RS485-LB Supports BLE configure and wireless OTA update which make user easy to use.
Each RS485-LB pre-load with a set of unique keys for LoRaWAN registration, register these keys to LoRaWAN server and it will auto connect after power on.
Features:
LoRaWAN 1.0.3 Class A
SX1262 LoRa Core
Ultra-low power consumption
Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864/MA869
Support multiply RS485 devices by flexible rules
Support Modbus protocol
Support Interrupt uplink
Supports connecting a UART sensors with 3.3V or 5V
Support Bluetooth v5.1 and LoRaWAN remote configure
Support wireless OTA update firmware
AT Commands to change parameters
Uplink on periodically
Downlink to change configure
8500mAh Li/SOCl2 Battery
Applications:
Smart Buildings & Home Automation
Logistics and Supply Chain Management
Smart Metering
Smart Agriculture
Smart Cities
Smart Factory
Common DC Characteristicsr:
Supply Voltage: 2.5v ~ 3.6v
Operating Temperature: -40 ~ 85°C
LoRa Spec:
Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
Max +22 dBm constant RF output vs.
RX sensitivity: down to -139 dBm.
Excellent blocking immunity
I/O Interface:
Battery output (2.6v ~ 3.6v depends on battery)
+5v controllable output
1 x RS485 Interface
1 x UART Interface , 3.3v or 5v
1 x Interrupt or Digital IN/OUT pins
1 x I2C Interface
11 x one wire interface
Power Consumption:
Sleep Mode: 5uA @ 3.3v
LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Também poderá gostar