Dragino LTC2 Industrial LoRaWAN Temperature Transmitter EU868
The Dragino LTC2 Industrial LoRaWAN Temperature Transmitter is designed to monitor temperature for different environment.
Todas as nossas páginas são protegidas com conexão HTTPS/TLS 1.3
Envio no mesmo dia de segunda a sexta para qualquer pedido feito antes das 10:00 am
The Dragino LTC2 Industrial LoRaWAN Temperature Transmitter is designed to monitor temperature for different environment. It supports to read PT100 probe and convert the value to temperature and
uplink to IoT server via LoRaWAN protocol.
LTC2 supports datalog feature. User can retrieve the sensor value via LoRaWAN downlink command.
LTC2 is powered by 8500mA Li-SOCI2 battery for long time measurement. The battery can run 2~10 years depends on the network environment and working mode.
Each LTC2 has two internal 16 bit ADC interfaces and are calibrated on 12 set resistors to make sure the accuracy measurement on wide range.
LTC2 is LoRaWAN v1.0.3 compatible. Each LTC2 is pre-load with a set of unique keys for LoRaWAN registration, register these keys to local LoRaWAN server and it will auto connect after power on.
LoRaWAN v1.0.3 Class A
max: 2 x monitor temperature channels
Support 3 -wire PT-100
8500mAh Li-SOCI2 Battery
Firmware upgrade via console
Configurable via LoRa or UART
Datalog and retrieve via LoRaWAN
Use pre-load PT100 probe or 3rd PT100 probe
Factory calibration for different resistance range
Support accuracy measure of resistance and upload
Battery Monitoring and upload
Logistics and Supply Chain Management
Cold chains solution
Industrial Monitoring and Control