Digital Matter G70 LTE-M / NB-IoT GPS Tracker
Rugged and robust vehicle, trailer, or heavy equipment tracking device with inputs/outputs, remote immobilization for fleet management, equipment monitoring, driver ID, theft recovery, and more
We protect your data with strict security measures to prevent unauthorized access.
Shipments in 2-7 business days depending on the courier selected during the purchase of the product.
You can return your purchase within 14 days if the product and packaging are in perfect condition.
Rugged and robust vehicle, trailer, or heavy equipment tracking device with inputs/outputs, remote immobilization for fleet management, equipment monitoring, driver ID, theft recovery, and more
High-precision GNSS (GPS/GLONASS/Galileo) wired tracking device
1 x Ignition Digital Input, 3 x Digital Inputs, 1 x Analog Input, 1 x Switched Ground Digital Output
Internal Backup Battery in case of loss of power or tampering
Driver ID – Configure iButton®, TTL, or Wiegand inputs for Driver ID Readers
Driver Behavior – Run hour monitoring, accident and rollover detection, speeding, harsh braking and cornering, and more
Remote Immobilization – Immobilization option to safely disable vehicles and equipment remotely
Weatherproof and ultra-rugged IP68, IK08 housing
Cellular Module Nordic nRF9160 Modem operates on all major global LTE-M and NB-IoT bands (supports roaming across networks – roaming SIM required)
Supported LTE bands:
LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B66
NB-IoT (Cat-NB1/NB2): B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66
GNSS Module uBlox EVA-M8Q
Constellation Concurrent GPS / GLONASS / Galileo
Channels 72 Channel High Sensitivity Receiver
Tracking Sensitivity -167dBM industry-leading tracking performance
*Location Accuracy ~2.0m CEP, 50%, 24 hours static, GPS, SBAS, -130dBm, > 6SVs
SIM Size & Access Internal Micro 3FF SIM
GNSS Assistance GNSS almanac and ephemeris data for greater sensitivity and position accuracy
Low Noise Amplifier GPS signals are filtered and boosted by a SAW filter and low-noise amplifier (LNA) allowing operation where other units fail
The following specs are shared between versions unless otherwise stated.
POWER
Input Voltage 8-36V DC (max)
High-Performance Automotive Power Supply Stringent power “load dump” tests are conducted to ensure operation in the harshest automotive electrical systems. Built-in self-resetting fuse makes installation simple and safe.
Operating Current 2G
≈250mA when moving
+ ≈60mA while internal battery charging
LTE-M / NB-IoT
≈50mA when moving
+ ≈60mA while internal battery charging
Intelligent Power Management Device enters sleep mode when vehicle is inactive to prevent battery drain
Sleep Current <1mA
Back-Up Battery 1100mAh LiPo internal backup battery pack
MECHANICS / DESIGN
Dimensions 126 x 80 x 27 mm (4.96 x 3.15 x 1.06″)
Weight 170g
Housing Non-branded housing for optional white-labeling
IP/IK Rating Ultra-rugged and waterproof IP68 and IK08-rated housing ensures the G70 can withstand impact, fine dust, and brief submersion
Installation 10 wire harness
1m Length
Operating Temperature -30°C to +60°C (connected to external power)
At < 0°C and > +40°C the internal backup battery will not be charged as a safety precaution due to the dangers associated with charging batteries at extreme temperatures.
Cellular Antenna Internal
GPS Antenna Internal
3-Axis Accelerometer 3-Axis Accelerometer to detect movement, acceleration, high G-force events, and more
Diagnostic LED Diagnostic LED indicates operation status
Flash Memory Store weeks of records if device is out of cellular coverage. Storage capacity for over 10 days of continuous 30-second logging.
On-Board Speed & Heading The device continuously monitors speed and heading, allowing for over-speed alerts as well as updates on speed and heading changes
On-Board Temperature The device reports internal temperature and prevents the internal battery charging in extreme temperatures. Internal temperature provides an indication of ambient temperature but may not always be precise.
INTERFACES
Analog Input 1 x Analog Input. 0-40V
Digital Inputs 3* x Digital Inputs with configurable pull-up/down
0-48V DC input range
On/Off thresholds:
Pull-up enabled: low at 0.4V, high at 1.9V
Pull-down enabled: low at 0.8V, high at 2.2VCan be used for pulse counting
*Digital Input 3 pin shared with Driver ID. Cannot be used in conjunction with Wiegand or TTL readers.
Digital Outputs 1 x Switched Ground Digital Output – 2A max
Easily wired up to switch external lights, relays, buzzers, etc. Can be used to immobilize a vehicle.
Ignition 1 x dedicated ignition Digital Input 0-48V DC – 2.2V on/off threshold
Can be used as a digital input if not required
TTL Interface Serial interface used to connect a Digital Matter RFID reader for Driver ID (requires external 5V power source)
Wiegand Enables easy integration with a variety of Driver ID card types and readers or keypads
1-Wire® or iButton® 1-Wire® or iButton® can be used to read Driver ID tags. Readers available to suit multiple card formats.
SMARTS
Auto-APN Auto-APN allows the device to analyze the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware
Accident & Rollover Detection Configure accident and rollover alerts triggered by extreme changes in velocity and orientation of vehicle or equipment. Second-by-second GPS data is saved on the device’s flash memory, with a capacity of approximately 2 hours of data. In the event of an accident, a subset of the data (60 seconds before / 10 seconds after) is uploaded to the server automatically (if configured) or can be requested manually for a detailed reconstruction of the incident.
Driver ID Options RFID reader, iButton®, or Wiegand interface for Driver ID, access control, and logbooking
Driver Safety & Behavior Monitor speeding, harsh acceleration, braking, cornering, idle times and more to improve safety and prevent unnecessary wear on vehicles
Geofence Alerts The server can use device location to create geofences and alerts if an asset enters or leaves designated locations
Geofence Download to Device Geofences can be downloaded directly to the device from Telematics Guru for enhanced location-based actions and alerts.
LTE-M / NB-IoT – Maximum of 500 geofences with up to 100 points per geofence
GPS Jamming Detection GPS Jamming or Interference can be detected and alerted on
In-Vehicle Alerts Can be wired up to external buzzers or lights for in-vehicle alerts
Lone Worker Safety Interface a variety of duress pendants to enable man-down alerts for lone worker safety monitoring
Preventative Maintenance Set reminders based on distance traveled and run hours to reduce maintenance and repair costs
Real-Time Tracking Device remains continuously connected while on the move for real-time asset tracking
Remote Immobilization Digital outputs can be connected to a relay to enable remote immobilization of vehicles and equipment in the case of theft, abuse, or unauthorized usage
Run Hour Monitoring Calculate run hours and distance traveled (odometer) to understand and optimize asset utilization
Sensor Monitoring Interface with a range of devices and switches for seatbelt detection, duress and panic buttons, lights, in-cab warning buzzers, and more
Tamper Alerts Instant alert if the device is removed from your asset or disconnected from its power source
Theft Recovery
Switch to Recovery Mode in the case of theft or loss to activate real-time tracking for asset retrieval
DEVICE MANAGEMENT
Flexible Configuration Configure device parameters such as position update rate, movement and accelerometer settings, and more
Device Management Platform Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system
Configuration App Configurable with DM-Link provisioning tool
INTEGRATION
Third-Party Integration TCP Direct or HTTPS Webhook
SECURITY
Data Security Military-level AES-256 Encryption from device to Device Management Platform to protect the integrity and confidentiality of telematics data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security.
WARRANTY
Manufacturer’s Warranty Two-year manufacturer’s warranty. Exclusions apply.
CERTIFICATIONS
LTE-M / NB-IOT – FCC, ISED, CE, ACMA RCM, EMC, RoHS, ICASA